LED ARRI SKYPANEL S60-C

Unlike other tuneable fixtures, SkyPanel makes no sacrifice when it comes to light output. SkyPanel puts out a tremendous amount of light, in a soft and uniform beam field. Brighter than a 2 kW tungsten soft light or a 6 kW tungsten space light, the SkyPanel S60 has more than enough light for most applications. At the same time, the lamphead is able to perform beautifully at lower light levels. This range of illumination and color gives users an unprecedented amount of control.

Made in Germany to the high standards for which all ARRI products are known, SkyPanel is built to last – constructed from resilient materials and assembled by hand with great care. Other features include an on-board battery input for mobile applications, LAN port for network connectivity, USB-A port for firmware updates via thumb drive, and many more.

SkyPanel series
Model: S60-C
Optical System: Soft Diffusion Panel
Light Aperture / Lens Diameter in mm: 645 x 300 mm
Light Aperture / Lens Diameter in inch: 25.4 x 11.8"
Beam Angle: 115° (Half Peak Angle)
 
Weight in kg net*
Manual Version: approx. 13 kg
Pole Operated Version: approx. 14 kg
 
Weight in kg packed*
Manual Version: approx. 21 kg
Pole Operated Version: approx. 22 kg
 
Weight in lbs. net*
Manual Version: approx. 28 lbs
Pole Operated Version: approx. 31 lbs
 
Weight in lbs. Packed*
Manual Version: approx. 46 lbs
Pole Operated Version: approx. 49 lbs
 
Measurements (HxWxL) incl. Pin in mm*
Manual Version: 566 x 826 x 133 mm
Pole Operated Version: 567 x 796 x 133 mm
 
Measurements (HxWxL) excl. Pin in mm*
Manual Version: 433 x 826 x 133 mm
Pole Operated Version: 452 x 796 x 133 mm
 
Measurements (HxWxL) incl. Pin in inch*
Manual Version: 22.3 x 32.5 x 5.2"
Pole Operated Version: 22.3 x 31.3 x 5.2"
 
Measurements (HxWxL) excl. Pin in inch*
Manual Version: 17.0 x 32.5 x 5.2"
Pole Operated Version: 17.8 x 31.3 x 5.2"
 
Measurements (HxWxL) Packed size in mm*
470 x 860 x 300 mm
Measurements (HxWxL) Packed size in inch*
18.5 x 33.9 x 11.8"
Handling: Aluminium Yoke, High-Strength Tilt Lock / Steel Yoke, Pole Operation for Pan & Tilt
Mounting: 28 mm Spigot (Junior Pin)
Tilt Angle: +/- 90°
Lamphead Voltage Input: 48 V DC
Power Consumption: 420 W Nominal, 450 W Maximum
Lamphead Power Connection: Male 3-Pin XLR - 15 Amp (Pin 1: Negative / Pin 2: Positive)
Battery Connector: Male 4-Pin XLR - 10 Amp (Pin 1: Negative / Pin 4: Positive)
Battery DC Voltage Range: 23 to 36 V DC
Battery Mode Light Output: 50 % of total output
White Light: 2,800 K to 10,000 K continuously variable correlated color temperature
Colored Light: Full RGB+W Color Gamut with Hue and Saturation Control
Color Temperature Tolerance: +/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)
Color Rendition: CRI Average > 95, TLCI Average > 90
Green-Magenta Adjustment: Continuously adjustable (Full Minusgreen to Full Plusgreen)
Dimming: 0 to 100 % continuous
Control: On-Board Controller, 5-Pin DMX In and Through, EtherCon LAN network connectivity, USB-A, Art-Net
Wireless Control: Not integrated, via SkyLink
Remote Device Management (RDM): DMX Setup, Hour Counter and Standard RDM Commands
 
Software / Mini-USB Interface
Ethernet: DMX Setup, Fixture Status and Firmware Upgrade through PC, Mac USB-A: Software Upgrade via flash drive
 
Ambient Temperature Operation: -20 to +45° C (-4 to +113° F)
Protection Class / IP Rating: III / IP 20
Estimated LED Lifetime (L70): 50,000 hours
Estimated Color Shift Over Lifetime (CCT): +/- 5 %
Certifications: CE, CB, ENEC, cNRTLus, FCC, PSE
 
Power Supply Unit: S60/S120 PSU
Power Supply Input Range: 110 to 240 V ~, 50/60 Hz
Power Supply Output Range: 48 V DC
Power Input Connection: powerCON TRUE1 (Bare Ends / Schuko / Edison)
Power Output Connection: Female 3-Pin XLR to 10 Amp (Pin 1: Negative / Pin 2: Positive) powerCON TRUE1 (mains power through)
Weight in kg: approx. 4 kg
Weight in lbs: approx. 8 lbs
Measurements (HxWxL) in mm*: 91 x 191 x 383 mm
Measurements (HxWxL) in inch*: 3.6 x 7.5 x 15.1"
Control: On-Board On/Off Switch
Mounting: SkyPanel PSU Super Clamp Adapter / Rail Mount Adapter
Certifications: CE, CB, ENEC, cNRTLus, PSE