DJI Ronin-MX Stabilizer

The DJI Ronin MX gyro stabilizer is compact and so light that it can even be attached to your drone.
Surprisingly compact and incredibly light, the DJI Ronin MX gyro stabilizer weighs only 2.1Kg and easily fits in a backpack. Also robust, it is capable of supporting 4.5 kg equipment.

ENGINEERED FOR PROFESSIONALS
Cinematic film making demands rapid setup and a host of camera configurations. The Ronin-MX has been designed to carry many of the cameras used every day on sets worldwide, and SmoothTrack™ algorithms ensure movements are smooth in every configuration. A repositioned battery improves balance while stability is enhanced by a camera cage that locks mounted cameras in place at the top and at the bottom. Silent motors prevent on set mics picking up motor noise.

POWERFUL AND ACCURATE
Designed to resist high G-forces using powerful motors and IMUs, the Ronin-MX is engineered to maintain stability and hold horizon whenmounted to an aircraft or a vehicle. When mounted to the M600 aerial system, it communicates directly with DJI’s flight controlle, allowing it to stabilize actively for a smoother shot.

FREEDOM TO MOVE
A slip ring allows the Ronin-MX to rotate 360° continuously when mounted to aircraft or vehicles, opening up more creative options. This is further enhanced by an increase in tilt axis range from 90° straight down and beyond to 135°. Popular features of the Ronin series such as the three modes of operation and SmoothTrack™ are also present, giving film makers a range of creative angles and movements.

WIRELESS CONTROL AND TRANSMISSION
The Ronin-MX is compatible with Lightbridge 2, providing long-range HD video transmission from the air to the ground from up to 3.1miles (5km) away. If combined with the optional DJI Focus and Focus Expansion Module, focus or aperture can also be pulled remotely with a twist of the wrist. An optional Remote Start/Stop add-on provides the ability to control shooting on a range of airborne cameras.

REFINED BALANCE
A redesigned structure moves the Ronin-MX battery from the back to the front. This centers the weight of the camera, minimizing instability when flying directly forwards. It also dramatically increases the Ronin’s agility and ability to handle rapid movements or high-G situations.

MAGNESIUM CONSTRUCTION
Built extensively of lightweight magnesium, the Ronin-MX weighs just 6.11lb (2.77kg). This lightness allows it to be mounted to the M600 even when equipped with cameras as advanced as the RED EPIC, and to vehicles with a minimum impact on vehicle handling.

STRENGTHENED MOTORS AND ESCS
A combination of stronger motors and ESCs makes the Ronin-MX 50% more powerful than the Ronin-M. This additional stiffness and power allows the system to better withstand wind resistance when mounted to moving vehicles and aircraft, as well as more rapid movements.

EXTERNAL CAMERA BATTERY
Cameras such as the RED EPIC need an external battery for power. A dedicated position designed for an optional battery plate provides an easy, cable free mounting point for a 2nd DJI Intelligent Battery. This provides two 12V P-tap power sources for powering cameras and accessories.

INTELLIGENT BATTERIES
Intelligent Ronin-MX batteries are compact, light and offer a long battery life of 3 hours. Multiple batteries can be easily brought to set for a full day of filming. Over-charge and over-depletion protection is built in, as is individual cell charge balancing. Remaining power is shown by clear LEDs and in the DJI GO app.

REMOTE FOCUS CONTROL
The DJI Focus uses DJI’s expertise in brushless motors for previously unheard of levels of precision and accuracy. The brushless motor puts just ±0.02 of accuracy in the hand so that turning the remote is just like turning the lens itself. It also features high torque and a fast reaction speed so that subjects can be kept in focus no matter how they move. When upgraded with a Focus Expansion Module, the Focus can control aperture or focus across Lightbridge 2’s 3.1miles (5km) range.

2ND OPERATOR CONTROL
A wireless 2.4GHz remote controller is included with the Ronin-M enabling a 2nd operator to remotely control pan, tilt, roll, and other functions. By using the optional Lightbridge 2 Remote Controller, you have long range control of the Ronin-MX up to 3.1 miles (5km).

FAST, PRECISE BALANCING
Save time and start shooting professionally stabilized video in under five minutes. Mount your camera to the Ronin-MX, quickly balance it, and then tap a button. The upgraded ATS (Auto Tune Stability) technology is more precise than before and completes the tuning and balancing processes with no tools necessary.

CINEMATIC SMOOTHNESS
Even with only one operator, SmoothTrack™ technology ensures the Ronin-MX translates movements into smooth camera angle changes. SmoothTrack™ settings from speed to deadband to acceleration are fully customizable. A ‘Single Axis Follow Mode’ enables two axis to be locked while SmoothTrack™ guides the camera along only one axis of motion.

FLEXIBLE MODES OF OPERATION
Three modes of operation, found on all Ronin series products, make the Ronin-MX a powerfully flexible camera stabilization system. Underslung Mode is the most common shooting mode, with the Ronin-MX held in front of the user. Upright Mode reverses Underslung Mode and puts the camera higher up making it ideal for raised shots above people or through sunroofs. Briefcase Mode makes it a narrow platform that fits easily through narrow hallways and doors.

UNIVERSAL MOUNTING
Mount the Ronin-MX to aircraft easily using a specially designed mounting plate. A separate universal Quick Release system that doubles as a vibration dampening system allows the Ronin-MX to be connected to everything from jib to tripod and anything in between. This plate isolates the Ronin-MX from unwanted vibrations coming from the platforms it is mounted to, and makes it usable everywhere.

High end gimbal stabilizer
Exemplary fluidity in all conditions
Smooth Track Technology
3h battery life
Robust, compact, and light frame with a contained weight of 2.1 kg
Supports a load up to 4.5 kg
Can be attached to vehicles and to a drone
Possibility of use with a second operator thanks to the included radio control
Wireless control and transmission with the DJI Go app

Operational modes :
Suspended mode
Vertical mode
Briefcase Mode
Air mode
Jib or Wirecam mode

Integrated independent IMU module
DJI Special Motors for Nacelle with Encoders
Bluetooth module
Connection: USB
Receiver: 2.4GHz
Temperature sensors
Processor: Advanced DJI 32-Bit DSP
Support D-Bus Receiver

Electric power
Static: 300mA (@ 16V)
Dynamic: 600mA (@ 16V)
Locked motors: Max 10A (@ 16V)
Operating temperature: -15 ° C ~ 50 ° C
Handle weight included: 2.77kg
Vibration absorber included: 2.15kg
Dimensions without handle: 280mm (W) x 370mm (D) x 340mm (H)
With handle: 560mm (W) x 370mm (D) x 440mm (H)

Camera Tray Dimensions:
Maximum depth from the center of gravity of the camera plate: 120 mm
Maximum height measured from the top of the camera tray: 195 mm

Maximum width: 160 mm
Accessory power ports: 12V regulated socket x 2; USB 500mW x 1; DJI Lightbridge x 1
Power: Input GCU 4S Ronin-M Battery
Radio control connections: 2.4 GHz; Bluetooth 4.0; USB 2.0
PC / MAC Assistant: Windows XP or later compatible; Mac OS X 10.9 or later
Mobile Software Assistant: compatible with iOS 7.1 or later; Android 4.3 or later

Load weight: 4.5kg
Angular Vibration Range: ± 0.02 °
Maximum Controlled Rotation Speed:
· Rotation axis: 200 ° / s
Pitch axis: 100 ° / s
Roll axis: 30 ° / s
Mechanical Threshold:
· Rotation Axis control: 360 ° in continuous rotation
Pitch Axis Control: + 270 ° to -150 °
Roll Axis Control: ± 110 °
Controlled Rotation Range:
· Rotation Axis control: 360 ° in continuous rotation
Pitch Axis Control: + 45 ° to -135 °
Roll Axis Control: ± 25 °